CONTROLLER CHARGER:
- A device that performs regulatory functions for rechargeable batteries, battery protected against overload and deep discharge to raise the average life of the batteries, solar cells and help systems use effective and lasting.
- The controller cũng indicate charging status of the solar panel to battery lực users to control the load.
- The controller cũng make the overcharge protection voltage (> 8.13 V) or low voltage (<5.10 V). Protection circuits of the controller performs the validation controls circuit breaker when the battery was fully charged per voltage is too low or average.
Specifications Solar Charge Controller 12V ( 24V ) / 20A
Model |
SL20TD |
||
Solar Power on (VS) |
<= 21 V |
||
Battery (VB) |
12V (24V) |
||
The charge current norms |
20A Max. |
||
Load current norms |
20A Max. |
||
Protection |
Overload: 120% / 5 min, 130% / 5 seconds
|
Stopped Working |
|
Short circuit |
|||
Current consumption (no load) |
50ms |
||
Temperature |
0 to 45 ° C |
||
Replace battery (recommended) |
50Ah - 200Ah |
||
Charging parameters |
Battery water - Acid |
Dry battery - Gel |
|
Stuffed charging voltage level (V_Full) |
5.14 V |
3.14 V |
|
Maintain charge pressure level (V_Float) |
8.13 V |
6.13 V |
|
Rates subject to charging attack (V_Reboost) |
2.13 V |
1.13 V |
|
Reuse level pressure (V_ReUse) * |
2.13 V |
13.0 V |
|
Report shallow level pressure (V_Empty) |
7.10 V |
5.10 V |
|
Cutting load level pressure (V_LVD) |
5.10 V |
2.10 V |
|
Display: LED |
Battery voltage level, the battery charging current level |
||
LED "LOAD STATE":
|
|||
Dimensions |
R x C x S / (145 x 45 x 110) mm |
||
Weight |
500g |