CONTROLLER CHARGER :
- A device that performs regulatory functions for rechargeable batteries, battery protected against overload and deep discharge to raise the average life of the batteries, and help systems use solar cells effective and lasting.
- The controller also indicate charging status of the solar panel to battery enables users to control the load.
- The controller also make the overcharge protection voltage (> 13.8 V) or low voltage (<10.5 V). Protection circuits of the controller performs the circuit breaker when the validation controls per battery was fully charged or average voltage is too low.
Specifications Solar Charge Controller 12V / 40A
Model |
SLC12-40MNA3 |
|
Solar Power on (VS) |
£ 21 V |
|
Battery (VB) |
12V / (10V-14.5V) |
|
The charge current norms |
40A Max. |
|
Load current norms |
40A Max. |
|
Protection |
Overload: 120% / 5 min, 130% / 5 seconds, 300% / 50ms |
Stopped Working |
Short circuit |
||
Current consumption (no load) |
50ms |
|
Temperature |
0 to 45 ° C |
|
Replace battery (recommended) |
50Ah - 200Ah |
|
Charging parameters |
battery water - Acid |
dry battery - Gel |
Stuffed charging voltage level (V_Full) |
5.14 V |
3.14 V |
Maintain charge pressure level (V_Float) |
8.13 V |
6.13 V |
Rates subject to charging attack (V_Reboost) |
2.13 V |
1.13 V |
Reuse level pressure (V_ReUse) * |
2.13 V |
13.0 V |
Report shallow level pressure (V_Empty) |
7.10 V |
5.10 V |
Cutting load level pressure (V_LVD) |
5.10 V |
2.10 V |
Display: LED |
Battery voltage level, the battery charging current level |
|
LED "LOAD STATE": . Green l - allows load output ready for operation. . Red l - dry battery error, over current or short-load incidentsè power cut output load. . LED "SOLAR STATE": . Green l - a solar charging and maintenance (float charge) the battery, V = const. . Yellow l - with solar power and is charging attack (Boot charge) the battery, I = Max . Red l - press the line charge and stop charging. |
||
Dimensions |
R x C x S / (185 x 45 x 110) mm |
|
Weight |
600g |